Home :: Flakes Instructions

Flakes Instructions

Click to enlarge

Flakes for Automotive & Craft

• These unique flakes and near-powders can be applied by either mixing into carries such as glues, clear coat or Color Blender. Apply by blowing, spray gun (large tips from 1.4 to 1.6), or special spray guns such as a Flake Gun.

• Flakes will require a large tip if sprayed through a spray gun, but can also be applied by hand brushing or sprinkling over a tacky basecoat and then covered with subsequent clear coats.

• Also can be blown using compressed air using a modified set up.

• The easiest method is to blow over a tacky/wet clear coat using a special spray gun mentioned above.

See Alsa's (.pdf) Instructions here.